========= menambahkan virtual machine baru =========

1. klik "new virtual machine" > pilih "Typical"
2. masukkan iso cd mikrotik
3. operating system > pilih "Other" | version="Other"
4. isi nama bebas
5. isi hardisk ke 1GB pilih "Split virtual disk"
6. klik "Customize Hardware"
 -> ram isi 128mb
 -> network adapter seting ke "Bridged"
 -> klik "add" dan tambahkan network adapter 1 (Host-only) & 2 (Host-only)
 ! -> jika belum host-only seting di "Virtual Network Editor" klik "Add Network" pilih 
      "Host-only" dan unceklis "Use local DHCP"
7. masuk ke "Virtual Network Editor" dan seting "Bridged to: (nama perangkat wireless sesuai device)

========= instal mikrotik =========

1. ketik "a" trus "i"
2. keep old configuration > ketik "n"
3. continue > ketik "y"
4. Press ENTER to reboot > disconnect disk terus Enter
5. login > admin | password kosong

========= setting internet gateway =========

<=> Setting nama router --------------------
1. system identity set name=bebas

<=> Setting nama interface --------------------
1. nama interface ether1 > interface set ether1 name=wan
2. nama interface ether2 > interface set ether2 name=labkom
3. nama interface ether3 > interface set ether3 name=TPL
4. cek konfigurasi > interface print

<=> Setting IP di setiap interface --------------------

-------- Seting DHCP di interface wan --------
1. syntax > ip dhcp-client add interface=wan use-peer-dns=yes disable=no
2. cek dhcp > ip dhcp-client print 

-------- Seting IP di interface labkom & TPL --------
1. syntax > ip address add address=10.10.X.1/28 interface=labkom
2. syntax > ip address add address=20.20.X.1/27 interface=TPL
3. cek ip address > ip address print

<=> Setting Routing --------------------
1. syntax > ip route add gateway=192.168.43.1
2. cek route > ip route print

<=> Setting DNS --------------------
1. syntax > ip dns set servers=(ip dns yg didapat dari server),8.8.8.8 allow-remote-requests=yes
2. cek ping domain > ping google.com

<=> Setting NAT pada setiap interface --------------------
1. syntax > ip firewall nat add chain=srcnat src-address=10.10.X.0/28 out-interface=wan action=masquerade
2. syntax > ip firewall nat add chain=srcnat src-address=20.20.X.0/27 out-interface=wan action=masquerade
3. cek konfigurasi nat > ip firewall nat print

========= setting change adapter option =========
1. ip pada wifi diubah menjadi static dengan cara di isi manual ip (bebas) dan subnet masknya

2. seting ip client VMnet1 (labkom)
 -[IP mikrotik]
  -> ip address = 10.10.X.2
  -> subnet mask = 255.255.255.240
  -> default gateway = 10.10.X.1
 -[DNS yang di isi pada mikrotik]
  -> preferred dns server = 192.168.43.1
  -> alternate dns server = 8.8.8.8

3. seting ip client VMnet2 (TPL)
 -[IP mikrotik]
  -> ip address = 20.20.X.2
  -> subnet mask = 255.255.255.224
  -> default gateway = 20.20.X.1
 -[DNS yang di isi pada mikrotik]
  -> preferred dns server = 192.168.43.1
  -> alternate dns server = 8.8.8.8

4. INFO! > ketika ingin mengecek masing-masing client maka di haruskan disable dulu client yang lain
   CONTOH > ingin mengecek client 1 (labkom) maka client 2 (TPL) harus di disable begitupun sebaliknya
5. kemudian cek masing-masing koneksi dengan cara ketik di cmd > tracert google.com
   jika yang muncul pertama adalah ip gateway maka seting internet gateway pada mikrotik berhasil
6. coba ping google dan buka situs apa saja